JBL VRX918SP Powered Subwoofer

Buy JBL VRX918SP Powered Subwoofer online in India at the best price with free shipping from BAJAAO - India's music equipment superstore.

JBL VRX918SP Powered Subwoofer

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive(R), 18 inch woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

JBL's VERTEC(R) Series Line Arrays lead the industry in large venue sound reinforcement. While intended for smaller venues than VERTEC, the VRX900 Series Constant Curvature Line Arrays are designed and built to the same high standards and uses the same advanced, concert-proven drivers. JBL's VRX900 Series speakers deliver extraordinary power handling, clarity, flexibility and, of course, stunning JBL sound in an attractive, easy to handle and affordable package.

JBL VRX918SP Powered Subwoofer Specifications:

• Power Rating: 1500 Watts Peak LF: Dual-Bridged Technology(TM), Class D

• Frequency Range: 31 Hz - 220 Hz

• Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)

• Frequency Response: 34 Hz - 220 Hz

• Maximum Peak Output: 126 dB SPL at 1m

• Bandpass Nominal Impedance: LF: 2 x 2 ohms

• LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive(R) woofer with neodymium-magnet

• Audio Input Connector: XLR with loop through

• User Controls: Input Attenuator (0-16 dB) Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru.

• Signal Processing: DSP based, resident in Input Module

• System Management: DSP based limiters for mechanical and thermal protection

• AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz

• AC Line Voltage: User selectable: 120V/240V (-15%, +10%)

• AC Input Connector: Neutrik PowerCon (NAC 3MPA)

• AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)

• AC Current Requirements: 6A per system at 120V, 3A per system at 240V

• Enclosure: 18 mm birch plywood.

• Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts

• Finish: Black DuraFlex(TM) finish

• Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam

• Net Weight: 38.5 kg (85 lb)

Write a review for this product!

Customer Reviews: